Alda Showcases
Alda Design manufactures a standard range of showcases and
counters.
Specials
can be made to order to suit your requirements.
We also offer a packing / crating service to our country and
interstate
customers
or delivery in the metropolitan area can also
be
arranged.
Construction from natural anodised aluminium frame with white
melamine
base.
Height adjustable glass shelves and sliding glass
doors.
|
|
Vertical Showcases
ASV915 - 900mm long x 450mm
deep x
1500mm
high
ASV918 - 900mm long x 450mm deep x 1800mm high
ASV1218 - 1200mm long x 450mm deep x 1800mm high
|
All Glass Counters
ASC9 - 900mm long x 450mm deep x 940mm high
ASC12 - 1200mm long x 450mm deep x 940mm high
ASC15 - 1500mm long x 450mm deep x 940mm high
ASC18 - 1800mm long x 450mm deep x 940mm high
|
|
Counters with storage
ASCS12 - 1200mm long x 450mm deep x 940mm
high
ASCS15 - 1500mm long x 450mm deep x 940mm high
ASCS18 - 1800mm long x 450mm deep x 940mm high
|
|
Counter Top Sandwich Case
ASSC9 - 900mm long x 450mm deep x 450mm high |
|
Locks: Supplied & fitted
ASL1 - For full glass showcases & counters
Optional extras available are
- Special sizes made to order
- Framework powdercoated
- Lighting
- Mirror back
|
|
|
| Ready to use |
All Speedframe components are pre-finished – no welding, no special treating and no waiting for paint to dry.
|
| Easy to assemble |
No special skills are needed and only simple tools. Strong joints are guaranteed. |
| Cut to size |
We can supply tube cut to length – making each project even easier. |
| Strong, rigid construction |
One piece metal joints with plastic inserts give strong rigid frameworks. |
| Easy to design |
No special knowledge or technical drawings are required. A simple sketch is all you need. |
| Versatile |
Choose any size, height or length. Speedframe takes care of requirements not covered by standard systems. |
| Re-useable, re-locatable |
Widely used for exhibitions and mobile displays. Speedframe is ideal for on-site assembly or pre-fabricated components. |
| Accessories |
All you need for paneling, glazing, cladding and shelving. |
4 EASY STEPS TO MAKING YOUR OWN SPEEDFRAME® STRUCTURE
- Once you have worked out what you are going to construct, simply order the number of tubes you will need together with the joints and inserts, plus any accessories. You need to allow 27mm for each joint and insert when calculating the length of the tube you need. You may find it helpful to produce a rough sketch with a list of items you need to order.
- Cut the tube to the size you need. Alternatively you can order pre-cut to size.
- Push an insert into the end of the tube and then a joint into the insert.
- Hammer the joint home to create a solid structure.
|
|
Plain Tube
25.4mm square cold-rolled mild steel
Powdercoat: Black |
|
Single Slotted Tube
Square tube, punched with 20mm x 3mm slots at 40mm centres on one face of the tube.
Powdercoat: Black |
3660mm
length
|
3000mm
length
|
|
Double Slotted Tube
Square tube, punched with 20mm x 3mm
slots at 40mm centres, on two opposite
faces of the tube.
Powdercoat: Black |
|
|
3000mm
length |
|
The Alloy Speedframe system comprises a range of extruded aluminium tubes, with joints and inserts as for the steel system. These extrusions cater for a wide range of cladding and glazing requirements and allow considerable flexibility in designing display partitioning and exhibition applications. The natural anodised finish, with colour / matched joints, is durable and aesthetically pleasing.
|
|
All tubes are 25.4mm square, extruded from aluminium alloy in natural finish and clear anodised. Cut lengths: In any size from 102mm to 3658mm. Glazing bead-alloy is supplied in 2540mm nominal lengths.
SPECIAL POINTS FOR ALLOY SPEEDFRAME
- Mitre fins of the section, if necessary, using nylon template and clippers or fine toothed hacksaw.
- Cladding must be fitted before framework is completed.
- Glass can be inserted after framework is completed as it is retained by snap-in bead.
APPLICATIONS:
JOINTS
Standard Speedframe joints provide the seven possible right-angled intersections of square tube. The joints are pressure die-cast in aluminium alloy and powdercoated black or silver to simulate the finish of the tubes. Joints type 6.6 are supplied unfinished as they are not visible when assembled.
|
|
|
Joint 1.1 |
Joint 2.2 |
Joint 3.3 |
| |
|
|
|
|
|
| Joint 4.1 |
Joint 5.2 |
Joint 6.3 |
| |
|
|
|
|
|
| Joint 6.6 |
Rounded 1.1 |
Adjustable Foot |
| |
|
|
|
|
|
Rounded 4.1 |
Nylon Black Cap |
Inserts |
Call into our showroom and see our display or contact us for more information
|
|
Back To Top^
|
